# Dusty Robotics

Autonomous BIM layout printing and coordination platform

Research: https://www.safecli.org/company/dustyrobotics.com
Company: https://dustyrobotics.com

## Evidence status

Procurement review needed
Source review: 2026-10-16T03:25:32.486Z
API: Unknown

Company-published claims, not independently verified controls. Unknown is not evidence of absence.

## Procurement checks

### Safety & supervision — Company-published

> | Obstacle detection sensors | 3 x infrared time-of-flight (TOF); ~3 ft (0.9 m) forward range | |

Source: https://support.dustyrobotics.com/hc/en-us/articles/52682349645851-FieldPrinter-Specs
Reviewed: 2026-10-16T03:25:32.486Z

> Built-in obstacle detection stops the robot for objects in its path, and cliff detection guards against slab edges and floor openings.

Source: https://support.dustyrobotics.com/hc/en-us/articles/53228299459355-What-Is-the-Dusty-FieldPrinter-An-Overview-of-the-Layout-Printing-Robot-and-System
Reviewed: 2026-10-16T03:25:32.486Z

- [ ] Request the application-specific risk assessment and safety documentation; test emergency stops, exclusion zones and human supervision on site.
- [ ] Record reviewer, test date, scope, result and supporting artifact.

### Field deployments — Company-published

> Print digital models directly on the jobsite floor.

Source: https://dustyrobotics.com/
Reviewed: 2026-10-16T03:25:32.486Z

> Dusty Robotics is the best solution for automated construction layout, with every capability needed on the jobsite.

Source: https://dustyrobotics.com/
Reviewed: 2026-10-16T03:25:32.486Z

- [ ] Speak with a named contractor using this model on a comparable site; confirm scope, duration and operating conditions.
- [ ] Record reviewer, test date, scope, result and supporting artifact.

### Measured productivity — Mixed claims — review

> Lay out 10,000 to 15,000 square feet per day with one person.

Source: https://dustyrobotics.com/
Reviewed: 2026-10-16T03:25:32.486Z

> ### Accuracy, Everywhere

Source: https://dustyrobotics.com/
Reviewed: 2026-10-16T03:25:32.486Z

> | Positioning method | Leica Absolute Laser Tracker (no GPS) | Tracker measures robot position in real time; exceeds total-station precision.

Source: https://support.dustyrobotics.com/hc/en-us/articles/52682349645851-FieldPrinter-Specs
Reviewed: 2026-10-16T03:25:32.486Z

- [ ] Run a supervised site pilot against your crew baseline; count setup, rework, downtime and intervention, not just peak speed.
- [ ] Record reviewer, test date, scope, result and supporting artifact.

### Operating limits — Mixed claims — review

> | Runtime | 2-3 hours per battery (continuous use) | Varies with drive intensity, obstacle density, and print frequency.

Source: https://support.dustyrobotics.com/hc/en-us/articles/52682349645851-FieldPrinter-Specs
Reviewed: 2026-10-16T03:25:32.486Z

> | Model | Range | Antennas | Display | Battery / runtime |

Source: https://support.dustyrobotics.com/hc/en-us/articles/52682349645851-FieldPrinter-Specs
Reviewed: 2026-10-16T03:25:32.486Z

> | Max slab slope | 5.8° (10.16%) | Robot can roll downslope when idle - do not leave unattended on an incline.

Source: https://support.dustyrobotics.com/hc/en-us/articles/52682349645851-FieldPrinter-Specs
Reviewed: 2026-10-16T03:25:32.486Z

- [ ] Validate terrain, weather, payload, power and runtime limits against the actual site.
- [ ] Record reviewer, test date, scope, result and supporting artifact.

### Maintenance & support — Company-published

> - Operator onboarding and training

Source: https://support.dustyrobotics.com/hc/en-us/articles/46326305844763-Getting-Started-with-Dusty-An-End-to-End-Workflow
Reviewed: 2026-10-16T03:25:32.486Z

> - Initial onboarding and training

Source: https://support.dustyrobotics.com/hc/en-us/articles/46326305844763-Getting-Started-with-Dusty-An-End-to-End-Workflow
Reviewed: 2026-10-16T03:25:32.486Z

- [ ] Confirm local service coverage, replacement parts, operator training, response times and warranty exclusions.
- [ ] Record reviewer, test date, scope, result and supporting artifact.

### Workflow integration — Company-published

> BIM-Driven Layout for Construction | Dusty Robotics

Source: https://dustyrobotics.com/
Reviewed: 2026-10-16T03:25:32.486Z

> "With Dusty we’re able to have everybody work together and we can see if there are issues with layout points in the CAD before we lay them out in the field."

Source: https://dustyrobotics.com/
Reviewed: 2026-10-16T03:25:32.486Z

- [ ] Test your actual plans, coordinate systems, data export and handoff to existing site workflows.
- [ ] Record reviewer, test date, scope, result and supporting artifact.

## Decision

- Owner:
- Intended use and data sensitivity:
- Blocking requirements:
- Pilot success criteria:
- Unresolved risks:
- Decision and review date: